Thread
:
Holding a cone in the lathe....
View Single Post
#
2
Posted to rec.crafts.metalworking
David Billington
external usenet poster
Posts: 856
Holding a cone in the lathe....
wrote:
I need to hold a stainless cone while I trim and bevel it in the lathe.
Any ideas on how to hold the cone?
One thought was to weld the big end to a a base plate and then use the tailstock to support the other end.
I might also turn an aluminum cone and slide it over and ecure it with ????
You can see a picture of what I'm trying to hold as the third picture down he
http://unreasonablerocket.blogspot.c.../03/parts.html
Or He
http://www.mcmaster.com/library/5/560702/44675K460l.gif
Paul
I had this problem and solved it like your 2nd thought, see 5th picture
down
http://www.metal-arts.co.uk/soffietta/index.html
. In my case the
brass cone fits over an aluminium cone and is held in place by the
external aluminium ring with matching taper. I also have made the same
type of item but with a much smaller included angle and held them the
same way.
Reply With Quote
David Billington
View Public Profile
Find all posts by David Billington