I've read some other info and think I agree with what you are saying here.
Just needed someone else to say what I was thinking.

Thanks again,
JD

"mac davis" wrote in message
...
On Thu, 6 Mar 2008 16:22:30 -0600, "JD"
wrote:

OK, you've talked me into it. After all the talk on here about the Beall
System, I've decided I really want one. I looked at Woodcraft and I don't
know exactly what I need in order to get started. I assume I'll need the 3
pad system, but do I go with the bowl buffs or the flat pad buffing pads.
Do
I need a mandrel set or would I be better served tearing apart the old
bandsaw that is shoved into the corner of my garage and rob parts off it
to
construct a buffing station? If I do that, is there anything else I need?

Mac, I know you've got some input here. Anyone else? Since I haven't
bought
anything yet, I'm open for any suggestions you might have. Also, I'm not
above saving money, so if I can build something rather than buy that would
be a plus.

Thanks,
JD

I started with the "normal" system, the one for about $70..
That lets you get started with the motor adapter and 3 wheels, along with
the
compounds..
I had a morse taper adapter from my shopsmith, if I didn't I would have
bought
theirs.. that way you can use it on your lathe, also..
(an old washing machine motor works well, but now I have an extra lathe)

Add bowl and goblet buffs as needed...
I'd suggest staying with beall as you add buffs, so everything is
interchangeable.. (buffs also thread onto the started adapter in the $70
kit)

If you can spare the cash, buy 3 of each size buff as you buy additional
sizes..
Some venders say you only need 2 buffs but I use 3 of each size..
I think they come in 2, 3 & 4".. I have all of them now but for bowls, you
only
need the largest size..
Add others for goblets and larger boxes..

I briefly considered building or buying the "3 - in - 1" setup, with all
three
buffs spinning on the lathe at one time..
I decided against it because the way I buff, bowls would be a hassle on
that
setup.. I like the buffing wheel sort of hanging out it space and working
the
bowl, especially the inside, and think the rod between the wheels would
get in
the way..
Wheel changes are just a few seconds anyway..
also, I usually buff a few things at a time, so I just change wheels as
needed..



mac

Please remove splinters before emailing