I've put the key peneumatic controls on ebay - those of you who make things
that use air might be interested:
http://cgi.ebay.com/ws/eBayISAPI.dll...m=300203957275
http://cgi.ebay.com/ws/eBayISAPI.dll...m=300203959131

one of them controlled the table which would raise and lower the item to be
tapped, the other controlled the tapping head and has dual regulators and
dual flow rate controls - they are both really cool and no doubt they would
be hugely expensive if you actually went out to buy one - and I've set the
starting price about as cheaply as you will find anything so that they can
find a new home quickly.

"William Noble" wrote in message
.. .
dismantilng this working snow tapping machine - if anyone wants pieces let
me know ASAP - it's mostly going to the scrap metal dealer - there is a
pneumatically actuated tapping head for example that might be of interest
to someone, the table iteslf to which the work is affixed, and some
cylinders. I'll try ebaying the pneumatic controls.

--
bill
to email me, to to my web page, www.wbnoble.com and find my email
or unscramble the following by removing spaces and correcting the obvious
spelling errors

wil lia m_b_n obl e at msn daught com


--
Posted via a free Usenet account from http://www.teranews.com




--
Posted via a free Usenet account from http://www.teranews.com