A forgery, using my name.

-------- Original Message --------
Xref: sn-us sci.electronics.repair:472776
Path:
sn-us!sn-feed-sjc-01!sn-xt-sjc-10!sn-xt-sjc-01!sn-xt-sjc-13!supernews.com!grolier!club-internet.fr!feedme-small.clubint.net!aioe.org!not-for-mail
From: "Michael A. Terrell"
Newsgroups: sci.electronics.repair
Subject: tuner has "noisy" tuning at bottom end of FM dial
Date: Sun, 24 Feb 2008 20:35:09 -0800
Organization:
Lines: 24
Message-ID:
References:


NNTP-Posting-Host: 8zupbN1cP7p1Dd5suoduXg.user.aioe.org
Mime-Version: 1.0
Content-Type: text/plain;charset="iso-8859-1"
Content-Transfer-Encoding: base64
X-Complaints-To:
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180
X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
X-Priority: 3
X-MSMail-Priority: Normal


"jakdedert" wrote in message
...
Scott Kelley wrote:
I have a Kenwood KT815 tuner - pretty decent 5 gang tuner... At the
bottom end of the tuning dial it is very difficult to tune -
inconsistant tuning, does not smoothly transition through the tuning
range, but rather jumps around, then does not necessarily stay tuned
in to that frequency well. These problems do not occur at the top end
of the dial.

I have cleaned the tuning capacitor on 3 different occassions using
various methods, including compressed air, circuit board cleaner, and
a combination of both. Every time I clean it, it works great for
awhile, then goes back to acting badly again.

Any thoughts about this? I suspect there have been previous posts on
the issue, but I didn't find anything...

Thx
Scott Kelley

Hey Scott...

Could the dial cord be binding? Also, advice above about the wiper is
valid. It's a brass piece that wipes against the shaft to ensure good
contact. Make sure no gunk's built up under there.

jak

jak



Never heard of it Jack, hit the road Jack and don't come back no more no
more.