Rotel Bias ...
"Arfa Daily" wrote in message
...
Anyone know off the top of their head, or have the manual to check what
the correct bias figure for a Rotel RB970BX Mk II is ? Working along the
lines of the 'standard' 20mA figure (about 5mV across the TPs which are
across a 0.22 ohm emitter resistor) the output stages idle quite cool, and
I see no signs of x-over distortion on the 'scope, but would be nice to
know the correct recommended figure.
**8mV across TP1 & TP3 & Across TP2 & TP4. Those are the figures for the
RB970BX. (Not MkII). I'll try to locate the data pertaining to the model you
have.
Trevor Wilson
|