On Feb 15, 12:32*pm, "EXT" wrote:
"bud--" wrote in message

... sdppm wrote:
I wired up some lights with a dimmer switch. When I have the switch in
the off position I am still showing 67 volts. That is accross the
Netural( White) and the Load (Black) Wire. If I measure between the
netural and ground it is Zero and if I measure between the Load and
ground I get 67 volts. Where have I gone wrong. Thanks for the help

A common question. You are probably measuring with a good digital meter.
You are seeing a "phantom voltage". There is capacitive coupling - as
between a hot wire and switched wire to and from the switch. This produces
a very small current, but produces a reading on a good high resistance
meter. A light bulb with pigtail leads will indicate if voltage is
actually present.

If it is phantom voltage being measured by a sensitive meter, you can often
prove it by measuring voltage between your left hand and your right hand.
They can be that sensitive.

You keep talking about the digital meters and there sensitivity. Would
I be better off with the old type meter and would the reading be more
true