I am new too. My friend taught me to use HUT turning wax. It works well.

http://www.rockler.com/product.cfm?p...6&cookietest=1

Use the brown one first then use the white one last.



"mac davis" wrote in message
...
On Fri, 15 Feb 2008 10:57:19 -0000, "John" wrote:

Hi all, I'm new here. I recently started making pens and I'm pleased with
the results. However, after some weeks of usage the finish on the pens
becomes dull and sometimes comes off altogether (or at least looks
patchy).
Presently I sand the pens smooth then, depending on the wood (and my mood)
I'll either leave it natural, stain it or give it a coat of Danish Oil.
Then they get a final finish with hard wax. I'm hoping to sell my pens
eventually but I couldn't think of doing so until I've solved this
problem.
I'm quite new at the turning game so I'd be grateful for any suggestions
as
to the best finish to use so that my pens will stand up to prolonged usage
without losing their looks. Thanks in advance.

If you're going to sell your pens, I really suggest you get the Beall
buffing
system and learn to use it..

All of the "Pen finishes" that I've tried are pretty much shellac and
wax..
Even Shallawax, which I really liked for a while, is not very durable..

I had several pens that I'd given to friends for testing that had the
finish
dull or just flake off... YUCK..

I sand and buff all of my pens.. If the wood needs it, I also wet sand
them with
Natural Danish oil and buff when it's cured..
I tell my customers that if the pen finish ever dulls, wipe it gently with
a
soft cloth and the glow is back... YMWV


mac

Please remove splinters before emailing