Compound angle Box Joint
On Feb 8, 6:27*am, Snog wrote:
If all else fails, I know this will work:
1. *Blade at 90 degrees to Table.
2. *Miter gage at 90 degrees to blade.
3. *Workpiece flat against the face of the miter gage (not tilted
front to back).
4. *Workpiece tilted side-to-side so that the angled end of workpiece
is flat on the table.
Please report back.
Reporting back.......
*DonkeyHody
I can visualise it now - but i figger the balde has to tilt to cut
"with" the grain
Please report back again when you have made a box.
DonkeyHody
"I'd rather expect the best of people and be wrong than expect the
worst and be right."
|