View Single Post
  #5   Report Post  
Posted to alt.home.repair
cshenk cshenk is offline
external usenet poster
 
Posts: 1,009
Default Wood foundation, floor covering ideas

"franz fripplfrappl" wrote

I have a small cabin (20x24) located in an area with sandy soil. The
foundation is wood as is the floor of the basement which is 3/4" plywood
(presumably treated) over 2x8 floor joists.


I'm sure it's properly treated. BTW, at this age, you may want to see if
there is a spray treatment you should reapply. This would be the time to do
it to make it easier.

There appears to be no rot or weakness in the plywood flooring.

Looking for options for floorcovering: bamboo, ceramic


Just ideas here as no experience with this type of construction, but it
seems you'd want to watch weight issues? You have no problems now but
adding a layer of ceramic is pretty heavy. Seems to me you miught create a
problem with that, which wouldnt happen with a lighter material.

Those pop in place, nail-less wood floorings (bamboo and other types) work
nicely if the floor is very even. For the bathroom and kitchen, there are
light weight 'tiles' that look like linoleum but in 1ft squares and seem
they would be perfect there. You can even get them in a 'woody look' and
then you can mop them easier than a wood floor (especially a plywood one!).

A thin layer of an underlayment is put down with a trowel and then you just
apply the tiles over it. If the kitchen is open to the rest, may want to
just keep the same wood floor pattern there though with the nail-less
laydown type.

If the place is a rustic cabin look (sounds like it) consider one of those
round 'American braided rag rugs' for the central 'living room' part. They
last a very long time and would look nice in that setting.

Oh one last part. Thank another poster for this as they gave it in feedback
some time back when I'd not have thought of it. If getting the nail-less
wood floor covering panels, be sure to get all the same batch at ones. They
have 'dye-lots' on them like paint. They can have slight variations among
them so you dont want a mis-matched color at the end when you run out.
Thats not an issue if you get the type that you stain and coat yourself, but
it's reputed to be fine with the other type (which I've never worked with,
laid my last floor before they had such nifty stuff on the market).