Thread: Hardwood floors
View Single Post
  #3   Report Post  
Posted to alt.home.repair
Kevin Ricks Kevin Ricks is offline
external usenet poster
 
Posts: 129
Default Hardwood floors

Jay wrote:
I just bought a 70 year old home in somewhat of a lower-end
neighborhood that I am fixing up a little, renting, and then maybe
selling it in 5 to 10 years. It has hardwood floors that have been
covered with carpet for many, many years. If I decide to sell the
house several years from now, I will completely refinish the wood
floors. But until then, I would like to find the cheapest method to
clean them up and protect them through the rental years. Can anyone
out there suggest some possible solutions?

My first thought was to lightly sand the floor, apply a darker stain,
then a good thick coat of poly. But I'm kind of confused as to
whether or not that will work if my current floor was shellac or
varnish (probably the case based on the age and condition).


Have you pulled up all the carpet and inspected all the floor space?
I redid a HW floor in one house we lived in, built in 1954. After
pulling up the carpet, there was quite a bit of damage that I had to
deal with. Stains, water damage, gouges along every wall from carpet
stretchers and carpet tack board damage etc.
My floor was top nailed so every nail had to be reset.
Had to do heavy sanding on some warped areas.
We sanded and coated with water based poly urethane. Turned out pretty
good but had to put throw rugs over some stains in the hallway that we
couldn't get out. Bleached them and sanded which helped take 75% of the
stain out.
Kevin