View Single Post
  #4   Report Post  
Posted to alt.home.repair
Paul M. Eldridge Paul M. Eldridge is offline
external usenet poster
 
Posts: 415
Default Incandescent Bulb Ban -- Motion Detector Fixtures, Poto cell fixtures and other exotic applications

Hi Wayne,

The provisions related to incandescent lamps within the "Energy
Independence and Security Act of 2007 (HR6)" are limited to "general
service" only -- basically your standard A19 household lamp. "General
service" is defined as:

1) having a medium (E27) screw-base;
2) a light output of between 310 and 2600 lumens;
3) an operating voltage of between 110 and130V; and
4) a standard or "modified" light spectrum (e.g.., GE's "Reveal").

Incandescent lamps that are explicitly EXCLUDED from this regulation
include the following:

appliance
black light
bug
coloured
infrared
left-hand thread (used where lamps may be stolen)
marine / marine signal
mine service
plant light
reflector
rough service / shatter-resistant / vibration service
sign
silver bowl
showcase
3-way
traffic signal
G & T shape
AB, BA, CA, F, G16-1/2, G-25, G30, S and M-14

When these regulations are phased-in starting in 2012, general service
lamps that produce approximately the same amount of light as a
traditional 100-watt incandescent will use no more than 72-watts; a
lamp with the output of a 75-watt incandescent will be capped at
53-watts, a 60-watt bulb at 43-watts and a 40-watt bulb at 29-watts.

As mentioned in my previous post, Philips currently sells general
service lamps that meet this new standard, and within the next few
years, GE expects to have lamps that will be four times more efficient
than the ones they sell now.

Cheers,
Paul

On Fri, 18 Jan 2008 19:29:40 GMT, Wayne Boatwright
wrote:

I've basically done what you've done in replacing all possible incandescent
bulbs with comparable output CFLs. In my case, though, there are instances
where the bulbs themselves are part of the decorative feature of the
fixture and I refuse to replace them with an unattractive CFL of any ilk.
What I've done is stockpile replacements that will probably outlast me. :-)

I'm sure that going forward there will be fixture of a type comparable to
what you have that will work with CFLs. In the meantine, I would highly
recommend stashing as many incandescent and halogen bulbs away as you think
you'll need until that time comes.

I don't see any other realistic alternatives.,