View Single Post
  #2   Report Post  
Posted to uk.d-i-y
robgraham robgraham is offline
external usenet poster
 
Posts: 1,730
Default mystery TRV configuration on radiators & problems with them ?

On 14 Jan, 14:09, Bovvered? wrote:
On Mon, 14 Jan 2008 05:44:04 -0800 (PST), JB



wrote:

2. 2 of the radiators have been really problematic, kitchen and spare
bedroom. They hardly get warm despite me having many attempts at
correctly balancing the rads. All rads upstairs close to the pump are
turned down almost fully and still heat up really quick. I've been
through most of the posts and FAQs on this too. When I switch all
other rads off and just keep these two on ONLY the spare bedroom rad
responds and really hots up. This has a TRV on the return (as the lsv
side gets hot first ???). The kitchen one only just warms a little
along the top and the return stays cold and has a TRV on it. I have
had both rads off the wall, flushed them (all clear) and both flow and
returns are clear of blockages. The kitchen rad fails to heat even
when its the ONLY one switched on. Mind blowing !!! The kitchen rad is
just new last week, flow and return seem blockage free and the flow
freely once the lsv and trv are opened without rad.


Apologies for this dumb suggestion, but have you bled the rads? The
kitchen rad failing to heat up sounds like an airlock


I would have thought that if the kitchen radiator is getting warm
"along the top", it doesn't need bleeding. But having just had a TRV
fail on me ( and had the hassle of fitting isolators so that I could
change it !) I will make the dumb suggestion of that being a
possibility - in fact having read the post again, it would seem a
distinct probability given that the pipes and radiator seem clear.

Rob