Lane wrote:

copper pyramids for people that believe in
such things to be used in meditation and other metaphysical/mystical uses.

Anyone care to share ideas that come to mind on this?

I'm not sure you would want to hear it. Probably something about
profiting from the afflicted. But if Glaxo Pharm can do it, so can you.

In other business, take a length a round copper bar the OD of the
tubing, and turn the ends down to the ID. Put a 90 degree bend in the
rod. Next- 1) profile a piece of ID sized rod to mate with the corner
bend at the proper angle. Solder. OR 2) Fixture the bent rod to put a
countersink (with an endmill)in at the proper angle. Solder on ID
diameter stud. I will leave it to others to provide copper machining
tips. I have found it to be the worst stuff to try to machine.

Or just make sheet metal corners as you do for the top, and solder
straps inside the corners that the tubing slides into. Call the corners
"power concentrators".

Kevin Gallimore


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----