"Clive Page" wrote in message
...
There are a couple of places in the house where ceramic wall tiles have
pulled away from the plaster underneath, and some more sound hollow when
tapped so are likely to pull away soon. Investigation shows they won't
go back in place as the wall has shrunk slightly (or else the tiles have
expanded, which seems unlikely).

It seems a lot of work to remove and re-lay the entire tiled wall, so
I'd prefer just to re-fit the few which have pulled away, as the rest
seem firm enough. But this means taking a tiny bit, less than a
millimetre, off the edge of a few tiles. I am guessing that it would
not be an easy thing to do with a tile cutter or a tile saw. I suspect
it could be done by grinding or filing along the edge, but I'm not sure
of the best tool for the job.

--
Clive Page

Bench grinder,if you have one? shouldn't be a problem taking off the amount
you need regardless of wheel type.