On Sat, 29 Dec 2007 08:58:57 -0600, John Fields wrote:

On Sat, 29 Dec 2007 12:49:01 GMT, mike urig wrote:

I want to reduce the voltage from 1.5 volts to 1.0 - .90 volts. What
resister would do this and what end goes toward to 1.5 volt side? Thanks

---
That's not enough information. What are you trying to do?

The voltage drop will tell an onboard motorcycle computer to richen the
fuel ratio a little more than stock. The signal comes from an O2 sensor
in the exhaust header pipes. I'm just trying to reduce the voltage a
little more than stock.

You can go he http://www.nightrider.com/parts/
hd2007HD_nbo2_voltage_divide.htm and read the part about "Testing the
NBO2 Inline Enrichment Device off the bike".