jusme wrote:
I need to clean some really caked on grease that is on an old engine in a
machine.
I was thinking of taking a tea kettle and shutting the spring-loaded lid,
inserting some 1/4" copper tubing into the lid's hole, setting the thing on
a hot-plate, putting a spring on the tubing where one would hold the tubing
so as to prevent fingers being burned.
Any suggestions would be appreciated.
If you want to build a steam generator, here's an easy way: take an old
propane bottle and follow the steps on the Web to remove the valve and
prepare it for reuse:
http://tinyisland.com/LPvalveRemoval.html
Then you can put water in it and thread in a 3/4" plug which has been
drilled and fitted with 1/4" tubing. Put the whole thing on an outdoor
burner like the kind that comes with a turkey deepfrying setup, and
heat it until it boils. Unless you have a valve on the tubing you
won't have an overpressure problem.
But it's a lot easier to use Castrol purple cleaner - spray it on, work
it with a wire brush, wash it off.
GWE
--
Posted via a free Usenet account from
http://www.teranews.com