View Single Post
  #6   Report Post  
Posted to uk.d-i-y
Graham Graham is offline
external usenet poster
 
Posts: 46
Default Vaillant vcw gb 242 Divertor valve jamming - can it be serviced ?

On Dec 27, 9:26 pm, geoff wrote:
In message
,
Graham writes





On Dec 27, 5:00 pm, geoff wrote:
In message
,
Graham writes


Just in time for xmas, the heatings gone on the blinks and the local
parts shop is shut till next year ..


the diverter valve has started to 'stick' mostly fully out so at
least the hot water is still working , but it will not actuate when
the radiators are 'on'


its moving half way , then lock's ... this morning it actually went
the full distance and the heating came on .. now it will only travel
half way ... agen ...


if i take it off - is there any way it can be serviced ? ie cleaned ?
or do these valves end up with ware ridges that mean its 'worne
out' ??


see some posts about de-scaleing them , this has been in service about
15 years


There is a service kit which should be available for about 10-15 quid


be very careful when dismantling, take lots of notes and pictures, it's
one of those things which always has one thing which you can't figure
out what goes where when you do one for the first time
IYSWIM


be warned


other than that, it's not particularly difficult to anyone with a brain
cell or two


--
geoff- Hide quoted text -


- Show quoted text -


? assume the service kit is a ' vaillant' only part ??? or are there
some after market items ?


I have repaired a few using a Vaillant pack

I don't know if pattern ones exist

--
geoff- Hide quoted text -

- Show quoted text -



Ok thanks for info ..

.... Well im wondering if a service kit will fix it , as one time its
working fine , the next its jammed solid ... the next , its stopped 1
mm short of working the switch ... i assume the service kit has seals
and diaphragm ... but dose it contain the moving parts ? I think
these .may have some ridges worn on them ?


... after 14/15 years may be a better idea to fit a new assembly ..when
i can buy one ......

the only problem is .. can you get it out from the front of the
boiler , ive access to the bottom and the front only ....looks like
may have to take the pump out to cleare it ....

tnx

G ..