Tapering problem Resized
"tiredofspam" nospam.nospam.com wrote in message ...
Just checked with a square, and all sides are square.
Everything needs to be square. This includes:
1) The sides of the leg needs to be square to each other
2) The saw blade needs to be square (perpendicular) to the table.
3) The jig needs to hold the leg square to the blade.
The problem that you have indicates that one or more of these is
not square.
As I mentioned in a previous post, the taper in the leg amplifies
the effect of anything being out of square so check very carefully.
|