What happens if I screw up the coolant air bleed?
Right now the car is cooling down. When it is cold again, I will
repeat the process correctly.
Update - the car cooled down.
I repeated the procedure and followed directions.
I let the engine idle, with the pressure cap off, until the upper hose
was hot. Then I opened the bleeder valve.
The coolant spurted with air for a few seconds, then ran nice and
steady with a solid stream of coolant. I closed the valve and replaced
the pressure cap.
Lots of heat from the blower. A 15 minute drive showed no signs of
over or under heating.
It worked!
|