Lathe parting operations
Fred Splittgerber wrote:
Hi all,
I am aware of the fact that parting is (usually/always?) not recommended if
the workpiece is held between centers.
What about parting off with the workpiece mounted between a regular 3-jaw
chuck and a live center? (1/4 hp lathe, Workpiece: brass, 5/8'' diameter).
Thanks,
Fred
Loosen off tailstock when the cut gets down to 1/8" dia.---I usually stop &
flex the piece till it breaks off.---You are cutting close to the 3-jaw aren't
you ??
|