Question regarding buffing
On Tue, 13 Nov 2007 16:00:55 GMT, Ecnerwal
wrote:
If you are using old buffs that have shrunk (worn, really), or the
goblet buffs that start smaller, you want more RPMs - you are basically
shooting for a more-or-less fixed surface feet per minute of the buff on
the wood, which varies with diameter and RPM.
It's a good job for the old Shopsmith, if you have an old Shopsmith
hanging around.
Beall suggests 1/3 hp or greater 1725 for the 8" buffs, and 3000 rpm for
the 4" buffs.
I have a Shopsmith but it's too friggin' loud at buffing speed to use more than
once..
mac
Please remove splinters before emailing
|