wrote in message
...
On Tue, 06 Nov 2007 20:10:37 GMT, "jthread" wrote:


"newman" wrote in message
news:9D3Yi.10184$h17.3468@trnddc04...
Any tips for installing a new set of gas logs?

I am replacing an older set and will probably need to remove some of the
older pipe.

Can I use teflon tape for the connections?

Thanks


Teflon except on the compression joints

should replace the pipe and keep it as low as possible away from the
flames.
after you install, inspect with flames on to make sure they are not
touching
or near the pipe. (i used one of the flexible hoses, for a water heater ~
i
think) check to be sure the couplings are right.

pretty straight forward


I assume this is NATURAL GAS, not propane.
NG requires a special teflon tape. Read the tape roll to know if you
have the correct type. It's often yellow colored tape. DO NOT use
any tape not labelled for NG. Myself, I prefer suing teflon tape for
plumbing and pipe dope for gas. But that's just my personal
preference.

I never understood the point to gas logs. Give me real logs to save
on gas, or just use the furnace which is more efficient.
But this is not my for me to decide so enjoy them.

oops. my assumption! thanks for your comment!

I like my gas logs. But I've got a fireplace made of limestone and my wife
insists on having a fire.