I hope I have come to the right NG as I saw many threads about buffing
here. I just want to learn to buff small metal articles like stainless
steel watch bands, spoons etc. I bought a 1/6 hp motor with flex
shaft, white and green rouge, and some small buffing wheels. These are
my problems so far:

1: Do I need to change the "angle of attack", or just always apply the
wheel to the work piece in one same direction? It seems that once I
change the angle, the lust disappears somewhat.

2. For the finer buffing , I used a cloth wheel(just sewn once near
the middle). One the wheel revs up, the cloth thread begins to fly
out( because of the anti centrifugal force ) so there is lint all over
the place and the wheel gets smaller and smaller. Even worse when I
apply the wheel to the rouge. Is the normal for this kind of wheels?
Should I just tolerate the lint?

3. It seems that the finer the rouge, the slower RPM should be used?
Correct?

Any help appreciated

ABC