"DerbyDad03" wrote in message
ps.com...
On 4 Oct, 20:00, Big_Jake wrote:
On Oct 4, 6:06 pm, Meat Plow wrote:





On Thu, 04 Oct 2007 22:38:58 +0000, wrote:
I had my 20 year old Carrier forced air furnace tuned up today.
The
technician snaked a camera up the inside of the furnace. He did NOT
find
any cracks, but he found "bulging spots" which he also referred to
as "hot
spots", inside the furnace. He claimed the heat exchanger had these
bulges
and claimed that this is a sign that it is getting close to
developing
cracks, and showed me the bulges.

But I wonder if what he showed me really was the heat
exchanger....can a
camera can really be snaked up inside a heat exchanger?...or was
what he
showed me something else. I always assumed that a heat exchanger
is a
tremendously dense piece of metal and that you would not be able to
"view
inside it with a camera" only "view it from below with a camera".
This
same cavity could also be seen without a camera by looking into the
furnace
with flashlight (he had removed one of the panels above where the
burners
are) What he showed me was was a vertical cavity which had a couple
of
bulges on the sides of the cavity which were bulging toward the
outside.
Is that really the heat exchanger he showed me? What does the heat
exchanger on a 20 Yr. old Carrier furnace look like and exactly
where is it
located?

There is also some rust present on the inside of the furnace.

The burners look like they produce a nice blue flame.

The technician is recommending a new furnace based on the age and
based on
the bulges and rust. Do I really need to be seriously thinking
about
getting a new furnace at this time because of the rust and bulges,
or is it
possible this furnace could last several more years? I believe they
recommended a new furnace 3 years ago when I moved in although I
don't
recall anyone showing me the bulges before, but I'm suspecting they
could
have been present 3 years ago too.

BTW, the company I've been using prefers to install Goodman systems,
although they would also be willing to give me a price on another
brand that
I have in mind which is Carrier. They say that they will warranty
both the
parts and labor for 10 years on the Goodman, but the warranty on the
Carrier
would depend on what their warranty is. Is a Goodman likely to last
as long
as a Carrier?

Thanks,

I used to do furnace checks and was told to sell new furnace installs
at
any cost short of being fraudulent. The heat exchanger in you furnace
is
welded steel and is not known to crack or develop leaks at the welded
seams. However at 20 years in service I would consider an upgrade if
it is
your budget to afford it. If it is affordable you would benefit from
an
increased efficiency in a high SEER rated furnace.

Sorry Meat,

Paul is right. Furnaces don't have SEER ratings, that is an AC
efficiency rating.

I manage several (around 20) townhouses that all have 16-17 year old
Carrier furnaces. We have replaced 3-4, and are expecting to have to
replace the rest of them over the next 2-3 years because the heat
exchangers are failing. Granted, it is generally the secondary heat
exchangers getting plugged with crud, but it isn't far fetched that
the primaries are failing too, or if you have an 80% efficient model,
the primary is all you have.

To the OP -

No, a heat exchanger is NOT a very dense piece of metal. Here is a
link to a photo :

http://americanhvacparts.com/Merchan...een=CTGY&Categ...

Your tech, from above or below, would be looking at the outside of
this, getting the same view as you have in the pictures. Typically,
on an upflow furnace, the heat exchanger is in the top of the cabinet,
but we don't know what you have.

Like Paul said, get another opinion. If you decide to wait, do
yourself a favor and spend $30 (or so) on a carbon monoxide detector.

JK- Hide quoted text -

- Show quoted text -

"No, a heat exchanger is NOT a very dense piece of metal."

Granted, I can't speak to a 20 YO Carrier, but the heat exchanger on
my old gas fired unit was one heavy, honkin' mass of metal, looking
somewhat similiar to an old water filled radiator. By far the heaviest
component of the entire furnace.


It may be the heaviest, but it's not like its a 1/4 inch thick.