View Single Post
  #3   Report Post  
Posted to uk.d-i-y
BoyntonStu BoyntonStu is offline
external usenet poster
 
Posts: 103
Default Spray rain water or collected condensate water on compressor to raise efficiency?

On Sep 29, 1:47 pm, (Andrew Gabriel)
wrote:
In article . com,
BoyntonStu writes:



How much 'gain' would we get if we sunk a 55 gallon barrel into the
relatively cool ground here in Florida, filled it with calcium free
water, and sprayed the condenser in a closed loop cycle when it is
running?


Any evaporated water would be made up with condensate.


I've worked in more than one data centre where on the hottest day
of the year, a few people have had to stand outside spraying the
condensor units with hoses, and it makes an enormous difference.

I'm less certain in your case though. You will eventually warm up
the 55 gallons of water which will significantly impair its cooling
ability. Also you will be spraying this heated water into the air.
You could end up infecting someone in the neighbourhood with
legionares disease. This is one of the most common ways it breeds
and is spread.

--
Andrew Gabriel
[email address is not usable -- followup in the newsgroup]


Andrew,

Thanks.


My 2 condensers produce about 2 gallons an hour of condensate.

My idea is to collect 10 gallons or so, activate a pump, and expel 10
gallons from the 55 gallon barrel, and replace with fresh condensate.

An algaecide/bacteriacide in the condenser pan would prevent bacteria
and algae formation.

AAMOF Algae slime is a MAJOR concern here in FL.

What do you use in the U.K. to prevent algae (and not damage the coils
etc.)?

Coincidentally, I stayed at the same Philadelphia hotel where
Legionnaire's disease was unfortunately discovered.

FWIW see me and my latest invention on YouTube: http://www.youtube.com/watch?v=TP21wqv0ia0

Look for other videos: search BoyntonStu