Thanks to all who replied. I went to HD and bought a blade from them.
Now to get back to the project (and get rid of this nasty bronchitis).

Joe

Joe wrote:
So, SWMBO has taken on an impressive project - a brick and granite
stair/walkway up to what will someday be our new addition. A couple of
years ago, I found a bunch of RR-crosstie-sized granite pieces
(~9"x13"x9') to use as stair risers (actually replaced the crossties
that were already in place). Now the 8 foot long distance between each
set of double steps is getting the brick paver/granite flagstone treatment.

Since nothing works out perfectly, I need to cut some bricks to fit in
the ends of the path, so I bought a HF tile saw on sale:
http://www.harborfreight.com/cpi/cta...emnumber=40315
Surprisingly, the Chinese have not mastered the art of diamond bonding
(!), and the blade turned to crap after sawing about 8 brick pavers
(1.25" thick). Since I have a lot more to do, I would prefer to buy a
decent blade (the saw itself is OK for my needs). Does anyone know of a
reputable 7" blade for wet cutting (3600 RPM) that will do the job for
brick and not cost gazillions? Angie has fun with stone, and would like
to use this to cut some other stuff as well, and I probably will also
use this setup for cutting the roughs for thin sections for mineral
studies.

Thanks,
Joe