Graham wrote in
ups.com:

Have I a problem or is this normal ??

On power up , there is a short period of nothing , followed by the
front panel -center lights short flash- then trigger lamps ligth and
reamin lit , scope then runs normally ... I think this is normal
start up -checks-

But I get a very bright spot on the tube before , normal operation
starts , normally center bottom screen- only for a short time may be
1/5 second ...

Too short to do any harm.


ive the set the eht board up -twice- now , for intensity, as in no
spot at zero control setting ..I find that when the scope is 'cold'
with zero intensity setting , i get a slight trace , as it warms up ,
15 mins or so , this falls to 'zero' as i had set up ..

Q is the bright spot at start 'normal' , and should i set the beam
cureant with the scopr hot or cold ... i would of thought 'hot' ?


Tnx

Grahm ..



make adjustments to the scope after a 20 minute warmup.

--
Jim Yanik
jyanik
at
kua.net