View Single Post
  #22   Report Post  
Posted to sci.electronics.repair
Eeyore Eeyore is offline
external usenet poster
 
Posts: 2,770
Default Bridge Failures ...



Adrian C wrote:

Arfa Daily wrote:
When a diode power bridge - discrete devices or four-legged package - fails,
it's almost invariably one diode in the 'negative' arm which goes short
circuit. Any thoughts on why this should be, rather than any one of the four
failing at random ?



I think now that I have posted physical theories to the last two
(plugtop; xmas light) I might have a similar *physical* answer to the
diode anomaly.

Sinking away heat from the diode PN junction is more efficient with a
large amount of ground plane to connect to which is the case with the
negative half of the bridge. These diodes will run with a higher Vf and
hence a higher power dissipation than the remaining diodes on the bridge
given that both positive and negative halves will be conducting the same
current. Where fault conditions exist on the DC side of the circuit,
these harder running diodes may be the first to fail?


I can blow that one away instantly.

If there is a larger amount of pcb foil, it'll help cool those 2 diodes. Since
they fail from over heating, that would suggest the positive diodes ought to fail
first.

Graham