On Thu, 13 Sep 2007 16:49:48 GMT, "Pete C."
wrote:
http://www.suscom-maine.net/~nsimmons/news/MillVFD.JPG
Interesting handle on that mill vise...
Werks gud as long as you remember not to stick your index finger thru
the spokes far enough to catch on the vise when spinning the handle.
One or two times was enough for the lesson to sink in. The rim is
apparently some sort of sealing ring for a high pressure pipe flange,
the hub is made from a 3/4" deep socket.
--
Ned Simmons