On Tue, 28 Aug 2007 17:02:06 GMT, "dadiOH"
wrote:

1. Extend top piece of frame beyond sides
2. Get two poles/boards of the correct length
3. Cut "V" notch in #2 poles/boards, bore hole an inch or so lower
and tie to frame
4. Get a helper and raise the thing
5. Brace #2 poles/boards from front

Did similar to brace a tarp on a 2" PVC frame over my tractor.

By jove, I think your idea can work this way:

http://img214.imageshack.us/img214/9...supportvb3.gif

Thanks.