Ned Simmons wrote:
On Sat, 25 Aug 2007 18:55:56 GMT, Randy Replogle
wrote:

Sofolatris wrote:
What size rod do I use for 8-32 threads.I tried 3/16 but it is too big.
thanx


The major diameter for #8 threads is .164"
#10 is .190"
Randy

This may sound like nitpicking, but .164 is the *nominal* size of a #8
screw thread. The *major diameter* (the actual diameter at the thread
crests) is determined by applying an allowance to the nominal diameter
to insure interchangeability. Major diameter for a 2B thread is .1571
to .1631, which is the number the OP is looking for. As has been
mentioned, 5/32 is close enough, 4mm would fall in the spec.


OK, if you want to pick nits........
This chart shows all of that
http://www.engineershandbook.com/Tab...readlimits.htm
Randy