DIYbanter - View Single Post - Need wiring diagram for Archer Toggle button Cat. No. 275-676

Bill Jeffrey

wrote:
I have a red sqaure toggle button that is supposed to light up when
engaged as well as provide power to some under body neons on my car.
I've tried several wiring configurations, but I can't get the damn
thing to work. Is anyone familier with this button? Or perhaps someone
with experience wiring toggle buttons/switches could explain the
concept to me? I have wires from my battery (pos and neg) and the two
wires from the neon light. Any help would be much appreiciated.

The Radio Shack web site doesn't respond to this part number.

One side of the switch goes to the battery positive. The other side of
the switch goes to the underbody neons, and to the 12-volt lamp or LED
in the switch. (This connection to the internal light may be internal to
the switch, or you you may have to jumper to it externally). The other
side of the internal lamp/LED goes to ground (battery negative).

BTW. If the light inside the switch is a neon, it won't work. It must be
a 12-volt bulb, or an LED with appropriate series resistor.

Bill