I suppose KBC is trying to save $$$ on printing. Instead of clearly
identifying the series on the item SKU like Enco, they leave it to the
customer to figure it out... or not. On the note I included, I asked KBC
to replace the -202 with the -102. When I get back in three weeks, I'll
see what they did (or didn't).

DoN. Nichols wrote:
According to Louis Ohland :
Width of dovetail at narrowest point is about 1.41"
Width of dovetail at widest point is about 1.68"
Depth of dovetail cut is .41"
Height of block is 1.73"

I now notice that there is no size listed for the toolholder, no "AXA"
or "BXA", nada...

http://www.kbctools.com/usa/Navigati...fm?PDFPage=486

1-459-202

I can't (ever) seem to get their web page -- I suspect that it
requires Windows and Internet Explorer, but the "202" part of the part
number suggests that it is a "Series 200" (which is Phase II's
equivalent of BXA). Series 100 is AXA and so on.

Good Luck,
DoN.