QC toolholders for piston and Aloris AXA QC toolpost do not work
On Wed, 08 Aug 2007 21:59:37 -0500, Louis Ohland
wrote:
My Enco and KBC orders arrived on the same UPS truck. When it came
time to try the KBC toolholder on the Aloris AXA, I found that it does
not work. The depth of the dovetail in the toolholder is too deep by
about 1/8th of an inch. It rattles on the toolpost.
Sounds like they sent you BXA holders.
--
Ned Simmons
|