All for the want of a bush
Tony Williams wrote:
In article ,
Roger wrote:
Bearing width 5/16" of which 1/16" is the flange
Bore diameter 5/8"
O/D 3/4"
Flange O/D 1"
An old 3/4" flanged tap connector is near that.
I have one here. Measurements are.
Bore = 17mm. (5/8" = 15.875mm)
O/D = 20mm. (3/4" = 19mm)
The flange (which I can't quite get at) looks to
be about 23mm OD, and there is plenty of length.
That 20mm OD is the bummer.
Nothing a smart tap with a big hammer wont fix.
I was wondering about tap connectors..
|