View Single Post
  #3   Report Post  
Posted to sci.electronics.repair
Charles Charles is offline
external usenet poster
 
Posts: 555
Default Philips 42" plasma almost comes on by itself ? (Otherwise works fine)


"Rodo" wrote in message
news:mZPji.226$YH3.71@trnddc08...
Hi all,

I bought this Philips plasma TV from Costco (Model# 42PF9431D/37). It is
on the wall in my bedroom. I noticed that it would click as if I turned it
on and after 10 seconds click again like if I turned it off when the TV is
off. This happens like once or twice a day. Because it has done it at
night when the room is completely dark, I can see the screen lights up a
bit. It never comes completely on when it is doing this. Otherwise the TV
works fine, no video or audio problems at all. After a few times of these
I decided to take it back to Costco and got another (same model no.).
Guess what happened? ... I got the same problem again :-(. So I decided to
do some things to rule out the power outlet:

I plugged it into an extension and into another outlet (away from my
bedroom). No change.
I plugged it into a UPS. No change
I cover the IR sensor in front of the TV. No change.

I finally called Philips and they referred me to a repair center. I just
got it back after they had it for two month. The receipt shows they
changed something called PSU and SSB. Here is the depressing part ... NO
CHANGE!.

I called my credit card company and I can do something with them to return
it but I really like the TV. Other than this click on, 10 secs later click
off, it really is a nice set. Not to mention that the installation is
already done on the wall. Anyway ...Can anyone suggest what else I can
check in my place that may be causing this TV to do this ?


Is there a programmable wake-up mode (like a clock radio). Is there any
other programmable feature that might cause this?

Do you have ghosts? Just kidding, as I know how frustrating these things
can be.