On 28 jun, 05:53, "James Sweet" wrote:
"b" wrote in message

ps.com...





On 27 jun, 22:56, "TT_Man" wrote:
Have you seen the way they connect their wires? They just twist them
together and put a plastic cap over the bare wires!
Multiply that by double current and it's no wonder they have fires -

Sounds dodgy!

I've spent time in the US and Japan, and I have to say that those flat
blade sockets are an atrocious design. They suffer sloppy fit problems
very easily . Those countries don't seem to have switched wall sockets
either, which the Uk standard has, so you get more arcing if plugging
in live equipment (which degrades the contacts even further).
The UK plugs are more complex, and expensive, but a damn sight safer
and a lot more sturdy and resist wear better -only ever had to
replace one or two fittings over the years.

I suppose all this is because it is a more recent standard - like the
German PAL TV system - which, since it was introduced later, had the
edge.
-B.

Done correctly, a quality wire nut is a very secure and long lasting
connection. It's not simply a plastic cap, but a plastic casing over a
threaded springy metal insert which grips the wires very well. I have some
UK terminal blocks, and the problem with them is that there's no mechanical
bond between the wires, the contact point is small, and they can and do work
loose or corrode over time. They generally are ok, but neither method is
greatly superior to the other.

The double current isn't really much of an issue, our large loads are 240V
too, it's handy to have both voltages readily available.

You can get quality US style receptacles, problem is they're expensive so
few houses come with them. I like many things about the UK plugs, but the
thing I don't like is they're *huge* so things like power strips and
multi-gang outlets are really cumbersome.

Having discussed this in length with a friend in the UK, we've both come to
the conclusion that both systems have many advantages and disadvantages and
neither one is a clear winner.- Ocultar texto de la cita -

- Mostrar texto de la cita -

Leaving aside the joining wires/terminal blocks issue, on the subject
of the plugs and sockets, the UK one to me is superior in many ways.
1. fused plugs.
2. cord grip in plugs
3. screw terminals in plugs -no wrapping wires.
4. ALL receptacles and plugs have earth pin.
5. 3 prong design means a better fit (they don't waggle about at all)
6. much thicker pins - handle more current, do not bend, and seem to
resist arcing damage better.
7. switched sockets
......etc.

The US /japan one only has the advantage of compact size, personally I
can live with a bigger plug if it means better performance. I couldn't
care less about cosmetic aspects!

just my tuppence' worth. -B.