View Single Post
  #83   Report Post  
Posted to rec.audio.tech,sci.electronics.basics,sci.electronics.components,sci.electronics.repair,sci.engr.television.advanced
Eeyore Eeyore is offline
external usenet poster
 
Posts: 2,770
Default Strange problem with low energy light bulb



Arfa Daily wrote:

"Richard Crowley" wrote in message
...

"Eeyore" wrote in message
...


Serge Auckland wrote:

"Eeyore" wrote
Serge Auckland wrote:

Quite apart from the problems of disposing of old CFLs, I question
the
whole principle of Low Energy lighting. If you have a conventional
bulb,
much
of the energy output is in the form of heat, which will help heat the
room,

and consequently will reduce the need for other heating, central or
otherwise.

That's sort of fine if you want extra heat. Often as not you don't.

If the central heating is on, then you are, by definition, needing extra
heat. The heat output from lighting will mean that the room thermostat
(or
radiator valves) will turn off that bit sooner.

Not really.

The heat from most lamps hangs around at ceiling level. It does sod all
to warm
a room.

I suggest you compare sitting in front of a 1kw bar electric fire to
switching
on ten 100w light bulbs to see how true that is.


Look at all the energy that is wasted producing light! :-)



What happens to all the 'waste' heat produced in vacuum "filled" bulbs that
used to be, if not still are, produced for garden use ?


What vacuum ?


It can't be radiated
into the atmosphere, as the envelope is substantially cold to the touch.
Does the fact that it must be hanging around in the vicinity of the
filament, modify the power consumption of the lamp compared to its light
output ? Does this make it a low(er) energy lamp? Why does the heat from the
anode of a power tube readily radiate across the vacuum, but the heat from
the filament of a vacuum light bulb seems not to? d;~}


Both do. It's called infra red radiation.

There's also conduction too.

Graham