You cannot take out the scratches without damaging the anti-glare surface.
There are a number of methods used for fusing this coating to the front
glass. If you try polishing the screen, you will remove the coating, and
thus damage the rest of the CRT surface.

The coatings on most of the CRT's and LCD panels, are damaged from not
properly cleaning, and people touching them with their fingers. Once
damaged, the surfaces are not repairable.

The solution is to change the CRT, but this is not going to be practical
even if you can find a new CRT.

--

JANA
_____


wrote in message
oups.com...
Got a large widescreen Phillips CRT type TV that has got some small
scratches on the screen...

It looks as if the actual TV screen has got a very soft outer covering
layer or something. Consequently, it looks its been marked every so
slightly in loads of places...

Any idea how I could get these scratches out or anything ?