DIYbanter - View Single Post

Gary Tait

wrote in news:1181855184.491368.274200
@d30g2000prg.googlegroups.com:

yes, this is what i was getting at. was wondering if i could avoid
hard wiring them together, though, tapping into the circuit on the
board, not the head leads. i guess i could just run wires from where
the signal leaves the board going to the head, and run them to the rca
jacks/ vice versa. thanks alot for your input.

I am thinking you might need head level access. If you can get data on the
NR chips, you might be able to use line level access.