1ziggi1 writes:

Ok this is fine he doesn't have a clue what a Laserdisc is but this
doesn't help my problem.

True. But there was another reply that suggested the cost to repair if it
was a bad pickup, would approach the cost of a replacement LD player on eBay.

You've cleaned the lens. Reseating connectors shouldn't hurt. Checking
power supply voltages would be helpful if they are marked.

The test that needs to be done is to measure the lsaer output power with a
calibrated power meter. I don't know what the spec is but a measurement
of 1 mW or more would probably mean it's OK, a measurement of under 0.1 mW
would likely mean it's bad.

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.