TheOldFellow wrote:
On Thu, 07 Jun 2007 07:32:19 GMT
"Julian" wrote:

I was doing a routine check for water leaks at home today, I just
observe the little 'spinning' wheel on the water meter with
everything turned off to make sure it's not moving - it wasn't.

Then I started thinking. The meter works by way of a little turbine
wheel that spins in proportion to water flow and is geared to the
counter unit. I wondered if the turbine needs a certain minimum flow
of water to overcome the meter's internal friction. So, by opening a
cold tap just a tiny amount (just little more than a constant stream
of drips) I observed that the meter wasn't rotating at all. My theory
would appear correct.

So, what if I fitted two ball cocks to the DHW header tank? One half
way down the tank to work normally and one at the top with a stop
valve upstream throttled to allow a drip feed only. With this working
24/7 I should get 'free' water maybe?

I'm not from Yorkshire BTW, I just like the idea of getting something
for nothing!

Julian.


No, you're a thief.

No, he is only considering the possibility.



--
Dave
The Medway Handyman
www.medwayhandyman.co.uk
01634 717930
07850 597257