Removing relay without damaging pcb (plated through holes)
"Al" wrote in message
...
Defintion of eutectic:
"The lowest temperature at which a mix of two materials will melt. Often
the temperature is an anomaly, that is, it is much lower than the
melting temperatures of only slightly different mixtures. Lead-tin
solder is an example. Lead melts at 327C, tin at 231C. The lowest
melting combination is 67 lead, 33 tin (180C). Non-eutectic mixtures
have a melting or softening range. Such mixtures do not flow well until
thoroughly heated past the softening range."
Jeesh, get a dictionary.
Al
I thought it was 67% TIN and 37% lead.
David
|