"Stoutman" .@. wrote in message
...
I am going to make my panels for my walnut dresser from solid lumber (no
ply). The panels will measure 21" long X 15 3/4" wide. Will 1/4" thick
panels be sufficient or will they be too flimsy? They will sit in grooves
in the rails (top and bottom) and in grooves in the legs (left and right).
If I go with 1/2 thick panels I will need to make my rails thicker.

Will 1/4" thick be sufficient? I know that if I was using plywood it
would probably be too flimsy.



This all boils down to personal preference. Actually 1/4" plywood panels
would be fine. While you may be able to push on the panel and deflect it,
it adds no strength to the panel as a whole. It simply fills in the hole
between the rails and stiles. If however you are going to attach any thing
on the in side side to the panels you want at least thick enough to handle
screws if you will be using screws. Personally I would choose plywood over
solid wood for stability, and ease of construction.