Another way to pull the lube through is to create a home made "pig" just put
the shop vac on one end and have it suck some small rags through the pipe
covered in lube.


wrote in message
...
On 23 May 2007 07:19:42 -0700, dpb wrote:

Have you done the capacity calculation?

I just did the calc and he could actually use 1.25" at 24.8% fill so
1.5 is plernty.
I agree with the push/pull theory and use the pulling lube Get the
real thing, not something you have in the garage. You can pre-lub the
pipe by squirting lub in and sucking it through with a vaccum