DIYbanter - View Single Post - Info Needed: Silverstone Model 18801 Stereo (Tubes)

Sofie

"hr(bob) " wrote in message
oups.com...

Several of the previous posters ignored the fact that the original
poster stated that when one of the tubes was removed, the other
filaments stayed lit This is not quite as simple as they believe.

H. R. Hofmann

In your first reply post you mentioned that there could be 2 parallel heater
strings
connected to the AC line, which could be true....
that fact was not ignored but may be irrelevant..... even if one of the
tubes are bad,
some kind of hum or noise should be heard out of the other channel. The
best bet is
probably a B+ problem or open speakers??