View Single Post
  #3   Report Post  
Posted to alt.home.repair
udarrell udarrell is offline
external usenet poster
 
Posts: 106
Default AC problems - Leaking Evaporator Coils

wrote:

I have a 8 year old York AC unit (10 SEER) in my house. (clipped)

Option 1) Charge the system and live through this summer - runs the
risk of recharging depending upon the rate of leak. Price estimate
$100

Option 2) There is a lot of rust around evaporator coil so replace the
evaporator coil. Since the requirements have changed, he suggested
that replacing coil will also mean replacing the condenser unit (both
13 SEER) to ensure compatibility. Price estimate ~$3000 for parts and
labor.

Option 3) This evening I called an authorized York dealer and he said
that they still can replace the 10 SEER evaporator coil for a price of
~1000 (not to exceed $1200) part and labor. They will not sell the
coil separately (I guess warranty issues?). Since the furnace and coil
is located in the attic, he said that this job would involve 4-6
hours of labor and following steps
a) recovery of freon from the system
b) Replacement of evaporator coil
c) leak testing and evacuation
d) Freon charge and testing
The new evaporator coil will come with 5-years warranty and if I want
to have it replaced, he will come out to take measurements. The coil
is likely to be a stock item or can be ordered and received in a
couple of days.

I am reluctant to go with option 1 of freon charge as it is a
environmental and health hazard. So far option 3 seems the best as it
is cheaper and fixes the problem that needs to be fixed. However, the
life of the condenser does bring up some questions i.e. has the low
freon pressure caused some damage? How long would a condensor unit
last? If the condensor unit breaks down, would that mean replacement
of the evaporator coil again as the new standards have jumped to 13
SEER? (YES)

I was wondering if the experts on this forum can comment on the
pricing of these options and offer advice on the options/concerns to
deal with this issue. Thanks Sam


Depending on a number of other factors, a 13-SEER coil with a TXV
refrigerant control would probably work.
It will hold more refrigerant and require more space.
Do NOT take my advice, ask every contractor in your area you can about
the best options!
http://www.udarrell.com/proper_cfm_b...syste ms.html

- udarrell

--
WISDOM PRINCIPLE DIRECTED EMPOWERMENT COMMUNICATIONS -
THE REAL POLITICAL ISSUES and WISDOM BASED PEOPLE EMPOWERMENT
http://www.udarrell.com/
http://www.udarrell.com/my_pages2.htm
http://www.udarrell.com/recognizing_real_enemies.html
http://jesuschristsavior.net/Beatitudes.html
Reality Is Not An Easy Thing To Be Confronted With or to Accept!