( sigh )
I can see I'm going to have to spell this out for you.
During the summer months, as the boiler is not serving DHW, he
needs to TURN IT THE **** OFF, not 'maintain it at 110'.
On Sun, 13 May 2007 15:10:07 -0400, "RBM" rbm2(remove
wrote:
Or, you could just replace the current aquastat relay on the unit with a
triple aquastat relay like Honeywell L8124A1007 which will do the same thing
as the current one, with the addition of the low temp cut in, which you can
set as low as 110
"Ron in NY" wrote in message
...
I am thinking of installing a Honeywell L7224U electronic boiler control on
my
Weil McLain gold series boiler. I do not make hot water with my boiler,
and as
so, it does not run when the house is not calling for heat. It has a
single
aquastat L8148A on it now that does not have a low limit control to keep
the
boiler warm. According to my oil service company tech, this cooling off
causes
moisture buildup, and because of the moisture, causes any fluffy carbon
build up
in the boiler to solidify, and clog up the unit, which has happened a few
times
already. The L7224U control box has a programmable low limit that you can
set as
low as 110 degrees, just to keep the boiler warm when the house is not
calling
for heat in the summer. My service guy says that this should keep the
carbon
from solidifying and plugging up the boiler. I have read thru the
instructions,
and there is only 1 thing that I question. If the power goes out, does the
unit
lose all of its programming, or does it retain it all during a power
outage ???
I can't find anyone who has installed one of these yet and has any
experience
with them.
RON
================================================== ======
Remove the ZZZ from my E-mail address to send me E-mail.
--
Click here every day to feed an animal that needs you today !!!
http://www.theanimalrescuesite.com/
Paul ( pjm @ pobox . com ) - remove spaces to email me
'Some days, it's just not worth chewing through the restraints.'
'With sufficient thrust, pigs fly just fine.'
HVAC/R program for Palm PDA's
Free demo now available online
http://pmilligan.net/palm/