On Fri, 11 May 2007 07:47:14 +0100, "Peter"
wrote:

I have a drainage pump in a manhole which connects to armoured cable in a
box at the top (inside) the manhole.
All is well until the pump breaks down, water level rises and the box does
not keep the water out.
Local electric store says they have nothing to help so I wondered .....
can I literally fill the box with silicon to solve the problem.
At the outset the connection should have been made above ground ( a wall
about 8 feet away) but alas, there is now not sufficient cable to play with
meaning the connection has to remain inside the manhole.
Any help appreciated.

Peter



These are listed by Screwfix

http://www.screwfix.com/app/sfd/cat/...31819&ts=66447

Andy