"Charles Bishop" wrote in message
...
While working in an older unit, I was helping to track down which fuse
controlled which circuit. The fuses were in a closet, in two separate fuse
boxes. These were the screw in/screw out fuses.

There were several porcelein fuse holders and each contained 2-4 fuses. I
unscrewed one fuse and noticed that the ceiling light in the bedroom went
out. However, when I unscrewed the other fuse in the porcelein fuse holder
(there were two) the same light went out. The same thing happened for the
light in the closet.

Why would two fuses control the same light?

The fuses are wired in series. Strange!

The porcelein fuse holders were a 4" square block for those that held two
fuses. Wires went into the back or sides of the fuse holder.

Oh, also, the wiring looks to be 12 or 14 ga (cloth covered, older wire so
it's hard to tell), and the fuses are all 30A. I'm assuming I should
mention this to the owner and mention that he should get the correct sized
fuses in?

Yes, sounds like a fire just waiting to happen.